R/KSM

Name: R/KSM
Brand: PROTEGO
SKU: product328841822782

Pressure or Vacuum Relief Valve, In-Line

Request for Quotation Find Contact Person

Features

Tecnología del 10%

para un aumento mínimo de presión hasta alcanzar la apertura completa

Extrema estanqueidad

Lo que se traduce en las menores pérdidas posibles de producto y en una reducción de la contaminación ambiental

Mantenimiento óptimo de la presión

Basado en la tecnología del 10 %, la presión de tarado está muy próxima a la presión de apertura para un mantenimiento óptimo de la presión en el sistema, en comparación con la tecnología convencional del 40 % o del 100 %

Para sobresión y vacío

puede usarse como válvula de alivio de presión o de vacío

Diseño compacto

Facilita la instalación cerca de suelos y paredes

Alta capacidad volumétrica

Reduce costes mediante el uso de válvulas más pequeñas

No corrosivo

Reducción de peso

en comparación con acero/acero inoxidable

Diferentes plásticos

Se puede combinar fácilmente

Function and Description

Pressure or Vacuum Relief Valve in Corner Design Made of Plastic

The PROTEGO® In-Line Valve R/KSM is a state-of-the-art Pressure or Vacuum Relief Valve in a right angle design made out of high-grade synthetic material. Typically, the valve is installed in the in-breathing or out-breathing lines of tanks, vessels, and process equipment to protect against unallowable or underpressure. The valve prevents emission losses almost up to the and prevents unacceptable product entry. The valve is a perfect solution for corrosive, polymerizing, or sticky substances.

Full Lift Technology

The will start to open as soon as the set pressure is reached and only requires 10% overpressure to full . Continuous investments in and a commitment to research and development have allowed PROTEGO® to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. This “Full Lift Type” technology allows the valve to be set at just 10% below the maximum allowable working pressure or (MAWP or MAWV) of the tank and still safely vent the required mass flow. The opening characteristic for pressure and vacuum side is the same.

Advanced Manufacturing Technology

Due to our highly developed manufacturing technology, the is maintained up to the set pressure with a tightness that is far above to the conventional standard. This feature is ensured by special valve seats made of high quality synthetic material or PTFE. After the overpressure is released or the vacuum is balanced, the valve re-seats and provides a tight . The optimized fluid dynamic design of the valve body and is a result of many years of research, resulting in stable operation of the valve pallet, optimized performance, and reduced product losses.

Product Data

Dimensiones

To select the nominal size Diamètre nominal The nominal size is an alphanumeric designation of size for components in a piping system, used for reference purposes, comprising the letters DN followed by a dimensionless integer that is indirectly related to the physical size of the bore or outside diameter of the connections, expessed in millimeters. (DN), please use the flow capacity chart on the following page

DN	50 / 2"	80 / 3"	100 / 4"	150 / 6"	200 / 8"
a	200 / 7.87	245 / 9.65	300 / 11.81	370 / 14.57	625 / 24.61 (650 / 25.59)*
b	376 / 14.80	521 / 20.51	563 / 22.17 (523 / 20.59)*	687 / 27.05 (651 / 25.63)*	914 / 35.98 (912 / 35.91)*
c	150 / 5.91	200 / 7.87	225 / 8.86	280 / 11.02	350 / 13.78
d	180 / 7.09	250 / 9.84	300 / 11.81	350 / 13.78 (405 / 15.94)*	560 / 22.05 (500 / 19.68)*

Dimensiones en mm / pulgadas

* Dimensions in brackets only for PVDF

Selección de materiales para la vivienda

Design	A	B	C
Housing	PE	PP	PVDF
Valve seat	PE	PP	PVDF
Gasket	FPM	FPM	FPM
Valve pallet	A, C, D	B, C, D	C, D

Special materials upon request

Material selection for valve pallet

Design	A	B	C	D
Pressure range [mbar] [inch W.C.]	±6,0 up to ±16 ±2.4 up to ±6.4	±5,5 up to ±16 ±2.2 up to ±6.4	±9,5 up to ±30 ±3.8 up to ±12	±30 up to ±100 ±12 up to ±40
Valve pallet	PE	PP	PVDF	Hastelloy
Sealing	PTFE	PTFE	PTFE	PTFE
Spindle guide	PE	PP	PVDF	Hastelloy

Special materials and devices with higher set pressure or vacuum are available upon request

Tipo de bridas de conexión

EN 1092-1; Form B1

ASME B16.5 CL 150 F.F.

other connections upon request

Diagrama de flujo volumétrico

Los diagramas de flujo volumétrico han sido determinados con un banco de pruebas de caudal calibrado y certifi - cado por TÜV. El flujo volumétrico V. en [m³/h] y el CFH se refi eren a las condiciones estándar de referencia de aire según ISO 6358 (20°C, 1bar). La conversión a otras densidades y temperaturas están referidas en el Vol. 1: “Fundamentos Técnicos”.